TER AP01 Air Purifier User Manual

The TER AP01 Air Purifier User Manual explains how to set up, use, clean, and maintain your TER AP01 air purifier. This guide covers first-time setup, control panel functions, Sleep Mode, Auto Mode, filter replacement, filter reset, troubleshooting, and product specifications.

TER AP01 Quick Start Guide

Before using your TER AP01 air purifier, place it on a stable, flat surface and make sure the air inlet and outlet are not blocked. For everyday use, the AP01 is designed for bedrooms, living rooms, pet homes, home offices, and other daily indoor spaces.

  1. Remove all packaging materials from the air purifier and filter.
  2. Make sure the filter is properly installed before use.
  3. Place the unit away from walls, curtains, furniture, and soft fabrics.
  4. Plug the power cord into a suitable outlet.
  5. Press the power button to turn on the air purifier.
  6. Select Auto Mode, Sleep Mode, or your preferred fan speed.

Control Panel Functions

Power

Press the power button to turn the TER AP01 air purifier on or off.

Speed

Use the speed button to adjust airflow manually. Higher speeds provide stronger air circulation, while lower speeds are better for quieter daily use.

Auto Mode

Auto Mode allows the air purifier to adjust operation based on detected indoor air conditions. This is useful for everyday routines when dust, pet activity, cooking, or room use changes throughout the day.

Sleep Mode

Sleep Mode is designed for nighttime routines. It helps create a calmer bedroom experience by reducing operating intensity.

Timer

The timer function lets you run the air purifier for a selected period instead of leaving it on continuously.

Child Lock

Child Lock helps prevent accidental changes to the control panel settings.

Light Control

The light control function lets you reduce display brightness during rest, sleep, or evening use.

Where to Place the TER AP01

For better airflow, place the TER AP01 where air can move freely around the unit. Avoid placing it directly against walls, behind furniture, under tables, or next to heavy curtains.

Bedroom Use Sleep Mode for nighttime air-care routines.
Living Room Use Auto Mode or manual fan speeds during daily household activity.
Pet Area Use near common pet spaces while keeping the air intake clear.
Home Office Use lower fan speeds for steady daily air circulation while working.

Filter Replacement and Reset

The TER AP01 filter replacement indicator will light up when cumulative running time reaches approximately 2160 hours. When the indicator turns on, replace the filter with a new compatible AP01 replacement filter.

How to Remove the Filter

  1. Switch the appliance off and unplug it.
  2. Remove the inlet grille.
  3. Grab the top rope of the filter and pull it out.
  4. Take out the used filter and install the new filter.
  5. Close the inlet grille before turning the unit back on.

How to Reset the Filter Indicator

After installing a new filter, press and hold the reset button for approximately 3 seconds. The filter lifetime counter will reset, and the filter replacement indicator will turn off.

Need a new filter? View the TER AP01 Replacement Filter.

Cleaning and Maintenance

Always turn off and unplug the air purifier before cleaning. Regular care helps keep your TER AP01 ready for everyday use.

  • Wipe the exterior with a soft, dry or slightly damp cloth.
  • Keep the air inlet and air outlet free from dust buildup.
  • Do not immerse the air purifier in water.
  • Do not use harsh cleaners, solvents, or abrasive pads.
  • Check the filter area regularly, especially in pet homes or dusty rooms.

Troubleshooting

The air purifier does not turn on

Check that the power cord is connected securely and that the outlet is working. Make sure the unit is assembled correctly.

The airflow feels weak

Check whether the filter needs to be replaced. Also make sure the air inlet and outlet are not blocked by walls, curtains, furniture, or dust buildup.

The filter replacement light is on

Replace the filter with a compatible AP01 filter. After replacement, press and hold the reset button for approximately 3 seconds.

The unit sounds louder than usual

Make sure the air purifier is placed on a stable, flat surface. Check whether the filter is installed correctly and whether the air inlet or outlet is blocked.

TER AP01 Specifications

Model No. MK-AP01
Voltage Supply AC100V-240V / 50-60Hz
Power Consumption 42.5W
Net Weight 3.2kg ± 0.5kg
Dimensions 300 × 170 × 406 mm

FAQ

How often should I replace the TER AP01 filter?

The filter replacement indicator lights up when cumulative running time reaches approximately 2160 hours. Actual timing may vary depending on room conditions, usage, pets, dust, and daily air quality.

Can I wash the TER AP01 filter?

Do not wash the main filter unless your official product instructions specifically say it is washable. Water can damage filter materials and reduce performance.

How do I reset the AP01 filter light?

After installing a new filter, press and hold the reset button for approximately 3 seconds until the filter replacement indicator turns off.

Is the TER AP01 a medical device?

No. TER AP01 is a home air-care appliance. It is designed to support everyday indoor air routines, but it is not a medical device and does not diagnose, treat, or cure health conditions.

Related TER AP01 Links

Back to blog